Continuous Process Profiling System

PROsentry monitors and reports all the critical parameters

of your soldering process, enabling total quality monitoring

and analysing of every product produced.

Time stamped data is generated and stored to allow any

parameter, on any product, at any time to be recalled.

Oven temperatures ‘snap shots’ are continually recorded to

enable parameters, conveyor speed, and SPC data to

automatically be calculated.

Process Rule Checks (PRC) is then performed, alarms

can be raised and people notified of any problems as soon

as they happen.

Three steps to total product traceability…

1. Set-up your product thermal profile using PROfiler -Temperature Profiling System.

2. Using this thermal profile, along with temperature measurements recorded at 40 points

    in the process, PROsentry calculates the thermal profile and resulting parameters for each

    product that passes through the process.

3. PROsentry continually performs PRC to determine if profile parameters are within tolerance,

    alarms or machine signals can be automatically generated if any limits are exceeded.

System Features and Highlights  

• Accurate (±1C/1.8F) temperature measurement at 40 points within the oven

• Communication port allows interfacing to the PROfiler – Thermal Profiling System

• Configurable alarms can be programmed to activate relay outputs for machine shutdown

   or operator annunciation.

• Central Processing Unit has large internal Non Volatile memory for buffering of data

  in the event of network failure.

• Programmable 24v inputs allow additional system expansion.

• Powered from machine 24VDC supply or from external universal mains supply adapter

• Optional 10BaseT Ethernet interface allows machines on a site to be networked for

   centralised data collation/control.

• Windows 95/98/NT/2000/ME/XP PC software for easy collation of data from machines

   and output to customer SPC systems

• RS485/RS232 interface allows easy interfacing to a PC or third party site management schemes

• Board In/Out sensors with lost board detection allow statistics to be gathered on

  machine throughput.